1994-1995 Dodge Ram 1500 5.2L Engine Control Module | 56028319

Engine Computer (ECM, ECU, PCM) for a 1994-1995 Dodge Ram 1500 - 56028319

The 1994-1995 Dodge Ram 1500 56028319 Engine Control Module ECU ECM is a crucial component that governs the performance of your Dodge Ram 1500. As the brain of your vehicle's engine, this control module ensures optimal fuel efficiency, smooth operation, and emission compliance. Crafted with precision and reliability, it replaces the original part numbers 56028319 and more. Trust this genuine Dodge module to keep your Ram 1500 running at its best.

Fits Part Number(s): 56028319

Replaced By:

Common symptoms of a malfunctioning engine control module include:

• Check engine light stays on after reset.
• Engine shutting off for no reason.
• The apparent loss of spark
• The apparent loss of injection pulse or fuel pump.
• Intermittent starting problems.
• Loss of communication between the ECU and the scanning tool.
• Wait to start light stays on.
• Poor fuel efficiency.

Get your Ram 1500 back on the road quickly by purchasing a replacement OEM 56028319 Powertrain Control Module PCM/ECM from Auto Computer Performance.

We stock a large inventory of control modules for most makes and models from 1989 to 2021. We have over 17 years of experience repairing and selling engine control modules. Your PCM will arrive pre-programmed to your specific vehicle and is simple to install.

We offer PCM Repair Services!

For over 17 years we have been repairing and programming Engine Control Modules. Our repair facility is equipped with state-of-the-art diagnostic and OEM programming tools. Our friendly and knowledgeable technicians will quickly diagnose and repair any issues with your PCM.

All of our control modules undergo strict quality testing and are guaranteed to meet OEM specifications and pre-programmed to match your VIN for a true Plug-and-Drive installation.

NOTE: We will need your VIN number during the checkout process in order to program the unit.

1994-1995 Dodge Ram 1500 5.2L ECM 56028319: FAQs

1. What is the 56028319 engine control module?

The 56028319 is the engine control module (ECM), also called the PCM or ECU, for the 1994-1995 Dodge Ram 1500 5.2L V8. It manages fuel injection, ignition timing, idle speed, emissions equipment and, on automatic models, transmission shift control. It is the main computer that keeps the engine running correctly.

2. Will this ECM fit my 1994-1995 Dodge Ram 1500 5.2L V8?

It is listed for the 1994-1995 Dodge Ram 1500 5.2L V8. Match the part number on your original computer with 56028319. Enter your 17-digit VIN at checkout and our technicians confirm fitment before the module ships.

3. What are the symptoms of a bad engine computer on the Dodge Ram 1500?

Typical signs of a failing 56028319 include a check engine light that keeps coming back, stalling or dying while driving, crank-no-start with no spark or fuel, rough idle, poor fuel economy, erratic shifting and a scan tool that cannot communicate with the ECM. See our guide to signs of a malfunctioning PCM.

4. Which trouble codes point to a failed ECM?

The 1994-1995 Ram uses OBD-I, so codes are read by cycling the key on-off-on three times and counting check engine light flashes, or with a compatible scan tool. Code 53 (internal controller failure) points directly to the computer, and codes 11 and 12 can also show up. Always rule out wiring, grounds, fuses and low battery voltage first, because they can set the same codes.

5. Is this engine computer pre-programmed?

Yes. Auto Computer Performance programs every engine computer to your VIN with the latest factory software before it ships, so it is ready for plug-and-play installation. Enter your VIN during checkout. These model years do not use a factory transponder immobilizer, so no key relearn is needed.

6. Where is the ECM located on the Dodge Ram 1500?

On the 1994-1995 Dodge Ram 1500, the engine computer is mounted in the engine compartment on the firewall, connected with a large multi-pin harness connector held by a center bolt. Disconnect the battery before loosening the connector bolt.

7. How do I install the replacement ECM?

Disconnect the negative battery cable, unplug the harness connectors from the old module, remove its mounting hardware and install the new 56028319. Reconnect everything firmly, reconnect the battery, turn the key on for about 30 seconds, then start the engine and let it idle so it can relearn idle and fuel trims.

8. Will a new ECM fix my check engine light?

Only if the light is caused by an internal computer fault. Sensor, wiring, vacuum or mechanical problems will still set codes with a new 56028319. Scan the codes and check power and ground circuits first, and call our technicians if you need help narrowing it down.

9. Is there a core charge on this ECM?

No. Auto Computer Performance does not charge a core fee on the 56028319, so you never have to ship your old engine computer back to receive full value. That makes the total cost simpler than most dealer and remanufacturer options.

10. What warranty comes with this engine control module?

Each 56028319 includes a 6-month warranty plus lifetime phone support, with the warranty prorated after the first 3 weeks. Every unit is inspected, repaired and bench-tested in-house by ASE-certified automotive electrical technicians before it ships.

11. How fast does it ship within the USA?

We ship from Margate, Florida, to all 50 states with tracking. In-stock 56028319 units are programmed to your VIN and typically shipped within one to two business days, and expedited options are available at checkout. Driving with a failing ECM can also mean failing a state emissions or emissions inspection, and you can check open recalls on the NHTSA recall lookup.

12. Does the 56028319 work with automatic and manual transmissions?

Calibrations can differ between automatic and manual 5.2L Rams, and California emissions trucks may use a different calibration. Match your original part number and give us your VIN so we load the correct program for your truck.

13. Is the 1994-1995 Ram ECM OBD-I or OBD-II?

It is OBD-I. Full OBD-II with the standard 16-pin diagnostic connector arrived on Dodge trucks for the 1996 model year. That means a 1996 or later computer will not work in your 1994-1995 Ram.

14. Can a bad computer cause my 5.2L Ram to run rich or stall?

Yes. A failing ECM can lose control of injector pulse and idle air, causing black smoke, poor mileage, rough idle and stalling at stops. Rule out the MAP sensor, coolant temperature sensor and vacuum leaks before replacing the computer.

15. Why buy a Dodge Ram engine computer from Auto Computer Performance?

Auto Computer Performance is a full-service automotive computer repair facility in Margate, Florida, with over 17 years of experience repairing, programming and selling control modules. You get a genuine OEM unit that is tested in-house, VIN programmed, shipped fast across the USA with no core charge, and backed by lifetime phone support.