2008-2009 Chrysler Aspen ABS Module | 68025874AB

Anti-lock Brake System Module for 2008-2009 Chrysler Aspen Control Module - 68025874AB

Peace of mind behind the wheel starts with confidence in your brakes. That's where the genuine 68025874AB ABS pump module for your 2008-2009 Chrysler Aspen comes in. It's more than just a replacement part; it's a commitment to safety, precision, and the unyielding performance you expect from your Chrysler.

Key Features:

• Guaranteed Genuine: Trust in the authenticity of OEM parts.
• Anti-Lock Brake System (ABS) Control: The heart of your car's braking system.
• Precise Fitment: Seamlessly integrates with your vehicle.
• Enhanced Safety: Improves stability during sudden stops and slippery conditions.
• Easy Installation: Each ABS module is programmed to your specific vehicle, however an ABS initialization process must be done once in the vehicle.

Compatibility:

• 2008-2009 Chrysler Aspen

Specifications:

• Part Numbers: 68025874AB

Common symptoms of a failing Anti-Lock Brake Control Module

• DTC Code C2116 – Pump Motor Fault / Pump Supply Low Voltage
• DTC C2200 - Anti-Lock Brake Module Internal Fault
• DTC C2200-49 – Anti-Lock Brake Module Internal Fault
• DTC U0121 – Lost communication with ABS Module
• ABS pump constantly running issue
• Communication issues
• Communication issues with Scanner
• Intermediate Power Loss
• Intermittent functionality issue
• Intermittent or Non-Functioning Speedometer
• No Communication with ABS module
• Random speedometer readings
• Solenoid valve malfunction
• Speedometer is not working
• Wheel speed sensor codes
• Wheel speed sensor issues
• No ABS assisted braking
• Traction control light on

Contact us if you have any questions

2008-2009 Chrysler Aspen ABS Module 68025874AB: FAQs

1. What does the 68025874AB ABS module do on the Chrysler Aspen?

The 68025874AB anti-lock brake system (ABS) module monitors each wheel speed sensor and pulses brake pressure to stop the wheels from locking during hard or slippery stops. On this Chrysler Aspen it also runs traction control and Electronic Stability Control (ESC), so a failure usually disables all three systems.

2. Will this ABS module fit my 2008-2009 Chrysler Aspen?

It is listed for the 2008-2009 Chrysler Aspen. The safest check is to match the part number on your original module's label with 68025874AB or its interchange numbers (68025873AB). Enter your 17-digit VIN at checkout and our technicians verify fitment before the unit ships.

3. What are the symptoms of a bad ABS module on a Chrysler Aspen?

Common signs of a failing 68025874AB include the ABS, traction control or brake warning lights staying on, the ABS pump running constantly or not at all, wheels locking during hard stops, a pulsing pedal at low speed, a speedometer that drops out, and a scan tool that cannot communicate with the ABS module.

4. Which trouble codes point to a failed ABS control module?

On the Chrysler Aspen, codes such as C2116 (ABS pump motor), C2114 (valve power feed), C2100 (system voltage low) and U0121 (no communication with the ABS module) are often tied to the ABS module. Before replacing it, check fuses, battery voltage, ground connections and the wheel speed sensors, because those faults can set similar codes.

5. Is the 68025874AB pre-programmed for my vehicle?

Yes. Auto Computer Performance programs each ABS module to your vehicle using the VIN you provide at checkout. After installation, an ABS initialization must be performed with a capable scan tool, and a steering angle sensor calibration may be needed on ESC-equipped models. Our support team can walk you through it.

6. Where is the ABS module located on the Chrysler Aspen?

On the 2008-2009 Chrysler Aspen, the ABS controller is bolted to the hydraulic control unit, which you can typically find by tracing the brake lines from the master cylinder on the driver side. The wiring harness connector releases with a locking lever.

7. Do I need to bleed the brakes after replacing the ABS module?

If only the 68025874AB control module is swapped and the hydraulic lines stay closed, bleeding is usually not needed. If any brake line is opened or the hydraulic unit is replaced, the system must be bled, and many technicians use a scan-tool-assisted ABS bleed to purge air from the pump circuits.

8. Is it safe to drive with a failed ABS module?

With a failed 68025874AB, your normal brakes typically still work, but anti-lock function, traction control and stability control are disabled, which increases stopping distance and skid risk on wet or icy roads. A lit ABS light can also fail some state safety inspections. Check for open recalls with the NHTSA recall lookup.

9. Is there a core charge on this ABS module?

No. Auto Computer Performance does not charge a core fee on the 68025874AB, so you do not need to return your old module to receive full value. That keeps the total cost clear compared with many dealer and remanufacturer programs.

10. What warranty comes with the ABS module?

Every 68025874AB includes a 6-month warranty plus lifetime phone support, with the warranty prorated after the first 3 weeks. Each unit is inspected, repaired and tested in-house by ASE-certified automotive electrical technicians before it ships.

11. How fast does it ship in the USA?

Orders ship from our facility in Margate, Florida, to all 50 states with tracking. In-stock 68025874AB units are programmed and typically shipped within one to two business days, and faster shipping options are offered at checkout.

12. Is the 68025873AB the same as the 68025874AB?

Both numbers are listed as interchangeable for the 2008-2009 Aspen in our catalog. Chrysler often issues slightly different numbers for drivetrain or option packages, so compare the label on your existing module with both numbers and give us your VIN to confirm.

13. Is the Chrysler Aspen ABS module the same as the Dodge Durango?

The Aspen is built on the same platform as the Dodge Durango, and for 2008-2009 the two SUVs share the 68025874AB ABS module. The module is programmed to your specific VIN, so it will be set up correctly for your Aspen.

14. Can a bad ABS module drain my Aspen's battery?

Yes. If the internal pump relay sticks, the ABS pump motor can keep running or draw power with the key off, leaving you with a dead battery. A parasitic draw test that points to the ABS fuse is a strong sign the module needs replacing.

15. Why buy a Chrysler Aspen ABS module from Auto Computer Performance?

Auto Computer Performance is a full-service automotive computer repair shop in Margate, Florida, with over 17 years of experience. You get a genuine OEM module that is tested, VIN-programmed, ships fast anywhere in the US with no core charge, and is backed by lifetime phone support from real technicians.